AV 30.2 / 60.2 / 100.2
  • Class D output stage - Highly efficient high end home stereo system with the ability to produce the highest quality audio with low power draw and minimal heat. Also allows for less noise with no input signal, since the internal circuitry is off when the unit has no signal.
  • Control Trigger - A control system is to allow remote switching of the amplifier's standby on/off feature.
  • Amp Status LED - The power LED shows whether or not the amplifier has power. The amp LED shows the state of the unit including normal usage, standby state, limit and temp limit.
  • Input and Output Connections via RJ45 - An RJ45 input/output designed to connect multiple AV brick amplifiers using a straight through CAT-5 cables.
  • Dip Switch Configuration - Used to configure RJ45 I/O, Mono usage, Sense ability, and the control trigger input.
Reference 125.2
  • 125 watts X 2 channels at 8 (20Hz to 20 kHz) at .09% Total Harmonic Distortion
  • Class A Pre-Driver circuitry improves low-level detail for a smoother and more musical sound.
  • Class AB Mosfet Output stage delivers efficient, linear power.
  • Balanced Inputs deliver the quietest and most accurate signal path between your preamp and amplifier.
  • Differential input stage with a current source load assures DC stability and wide bandwidth linearity.
  • Use of 1% Metal Film Resistors in the entire active circuitry to reduce noise for greater purity of sound.
  • Use of Toroidal Transformers and Computer Grade Capacitors to provide high current for superior dynamics and extended low frequency control.
  • Capability to operate at full power with a square wave input signal.
  • Individual External Fuse Protection prevents damage from accidental shorting of output devices, while preserving the highest level of integrity to the original signal possible.
Reference 125.7
  • 125 watts X 7 channels at 8 (20Hz to 20 kHz) at .09% Total Harmonic Distortion
  • Class A Pre-Driver circuitry improves low-level detail for a smoother and more musical sound.
  • Class AB Mosfet Output stage delivers efficient, linear power.
  • Balanced Inputs deliver the quietest and most accurate signal path between your preamp and amplifier.
  • Differential input stage with a current source load assures DC stability and wide bandwidth linearity.
  • Use of 1% Metal Film Resistors in the entire active circuitry to reduce noise for greater purity of sound.
  • Use of Toroidal Transformers and Computer Grade Capacitors to provide high current for superior dynamics and extended low frequency control.
  • Capability to operate at full power with a square wave input signal.
  • Individual External Fuse Protection prevents damage from accidental shorting of output devices, while preserving the highest level of integrity to the original signal possible.
Reference 200.1
  • 250 watts X 1 channel at 8 (20Hz to 20 kHz) at .09% Total Harmonic Distortion
  • Class A Pre-Driver circuitry improves low-level detail for a smoother and more musical sound.
  • Class AB Mosfet Output stage delivers efficient, linear power.
  • Balanced Inputs deliver the quietest and most accurate signal path between your preamp and amplifier.
  • Differential input stage with a current source load assures DC stability and wide bandwidth linearity.
  • Use of 1% Metal Film Resistors in the entire active circuitry to reduce noise for greater purity of sound.
  • Use of Toroidal Transformers and Computer Grade Capacitors to provide high current for superior dynamics and extended low frequency control.
  • Capability to operate at full power with a square wave input signal.
  • Individual External Fuse Protection prevents damage from accidental shorting of output devices, while preserving the highest level of integrity to the original signal possible.
Reference 200.2
  • 225 watts X 2 channels at 8 (20Hz to 20 kHz) at .09% Total Harmonic Distortion
  • Class A Pre-Driver circuitry improves low-level detail for a smoother and more musical sound.
  • Class AB Mosfet Output stage delivers efficient, linear power.
  • Balanced Inputs deliver the quietest and most accurate signal path between your preamp and amplifier.
  • Differential input stage with a current source load assures DC stability and wide bandwidth linearity.
  • Use of 1% Metal Film Resistors in the entire active circuitry to reduce noise for greater purity of sound.
  • Use of Toroidal Transformers and Computer Grade Capacitors to provide high current for superior dynamics and extended low frequency control.
  • Capability to operate at full power with a square wave input signal.
  • Individual External Fuse Protection prevents damage from accidental shorting of output devices, while preserving the highest level of integrity to the original signal possible.
Reference 200.5
  • 200 watts X 5 channels at 8 (20Hz to 20 kHz) at .09% Total Harmonic Distortion
  • Class A Pre-Driver circuitry improves low-level detail for a smoother and more musical sound.
  • Class AB Mosfet Output stage delivers efficient, linear power.
  • Balanced Inputs deliver the quietest and most accurate signal path between your preamp and amplifier.
  • Differential input stage with a current source load assures DC stability and wide bandwidth linearity.
  • Use of 1% Metal Film Resistors in the entire active circuitry to reduce noise for greater purity of sound.
  • Use of Toroidal Transformers and Computer Grade Capacitors to provide high current for superior dynamics and extended low frequency control.
  • Capability to operate at full power with a square wave input signal.
  • Individual External Fuse Protection prevents damage from accidental shorting of output devices, while preserving the highest level of integrity to the original signal possible.
Reference 200.7
  • 200 watts X 7 channels at 8 (20Hz to 20 kHz) at .09% Total Harmonic Distortion
  • Class A Pre-Driver circuitry improves low-level detail for a smoother and more musical sound.
  • Class AB Mosfet Output stage delivers efficient, linear power.
  • Balanced Inputs deliver the quietest and most accurate signal path between your preamp and amplifier.
  • Differential input stage with a current source load assures DC stability and wide bandwidth linearity.
  • Use of 1% Metal Film Resistors in the entire active circuitry to reduce noise for greater purity of sound.
  • Use of Toroidal Transformers and Computer Grade Capacitors to provide high current for superior dynamics and extended low frequency control.
  • Capability to operate at full power with a square wave input signal.
  • Individual External Fuse Protection prevents damage from accidental shorting of output devices, while preserving the highest level of integrity to the original signal possible.